An iron reservoir model based on ferrichrome: iron(III)-binding and metal(III)-exchange properties of tripodal monotopic and ditopic hydroxamate ligands with an L-alanyl-L-alanyl-N-hydroxy-beta-alanyl sequence

To gain knowledge about biological iron mobilization, tripodal monotopic and ditopic hydroxamate ligands (1 and 2) are prepared, and their iron-chelating properties are investigated. Ligands 1 and 2 contain three Ala-Ala-beta-(HO)Ala units and three [Ala-Ala-beta-(HO)Ala](2) units connected with tris(alanylaminoethyl)amine, respectively, and form six-coordinate octahedral complexes with iron(III) in aqueous solution. Ligand 1 and 1 equiv of iron give Fe-1, and ligand 2 and 1 or 2 equiv of iron produce Fe(1)-2, or Fe(2)-2. These complexes exhibit absorptions at lambda(max) 425 nm of epsilon 2800-3000/Fe, characteristic of tris(hydroxamato)iron(III) complexes, and preferentially assume the Delta-cis configuration. Loading of Fe(III) on 1, 2, and M(III)-loaded ligands (M-1 and M(1)-2, M = Al, Ga, In) with ammonium ferric oxalate at pH 5.4 is performed, and the second-order rate constants of loading with respect to Fe(III) and the ligand or M(III)-loaded ligands are determined. The rates of loading of Fe(III) on M-1 increase in the order Al-1 < Ga-1 < In-1, and those on M(1)-2 in the order Al(1)-2 < Ga(1)-2 < Fe(1)-2 < In(1)-2, indicating that the dissociation tendency of M(III) ions from the hydroxamate ligand is an important factor. The iron complexes formed with 2 are subjected to an iron removal reaction with excess EDTA in aqueous pH 5.4 solution at 25.0 degrees C, and the collected data are analyzed by curve-fitting using appropriate first-order kinetic equations, providing the rate constants for the upper site and the lower site of 2. Similar analysis for FeM-2 affords removal rate constants for Fe(up)-2, M(up)-2, and Fe(low)-2, and the iron residence probability at each site. The protonation constants of the hydroxamate groups for 1 and 2 (pK(1,) pK(2), pK(3), and pK(1,) pK(2)., pK(6)) are determined, and the proton-independent stability constants for Fe-1, the upper site of Fe(2)-2, and the lower site of Fe(1)-2 are 10(28), 10(29), and 10(28.5), respectively.     

Syntheses and reactions of functional polymers. XLII. Preparation and use of polymers having N-hydroxy-succinimide unit in the chain

Styrene-maleic anhydride alternating copolymer was converted to N-hydroxymaleimide-styrene copolymer by reaction with hydroxylamine in pyridine at room temperature. The conversion was more than 90%. From this copolymer, N-acetoxy- or N-benzoyloxymaleimide-styrene copolymers were derived by action of acetic anhydride or benzoyl chloride in dimethylformamide at room temperature. Acylation of several primary amines was carried out effectively by use of these N-acyloxyimide-styrene copolymers. The reaction of the acetylated copolymer with diethylamine at room temperature afforded N-hydroxyimide copolymer.     

Efficient synthesis of N-acyl-α-amino acids via polymer incarcerated palladium-catalyzed amidocarbonylation

A novel polymer incarcerated Pd catalyst (PI Pd 7c) was synthesized from amide-containing polymer 6b, and this catalyst was shown to be effective in amidocarbonylation, which is a versatile one-pot method for the preparation of N-acyl-α-amino acids. The reactions proceeded smoothly with a wide variety of substrates, and no leaching of the Pd metal to the reaction mixture was detected.     

Fragmentation study of peptides using Fourier transform ion cyclotron resonance with infrared multiphoton dissociation: experiment and simulation

In this study, the fragmentation of gas-phase protonated Angiotensin II is investigated using electrospray ionization (ESI), Fourier-transform ion cyclotron resonance (FT-ICR), and mass spectrometry (MS) with a laser cleavage infrared multiphoton dissociation (IRMPD) technique. The experimental results show that the spectra peaks for the photoproducts are y2/b6- and y7-type ions, corresponding to the cleavage of His-Pro and Asp-Arg in the parent amino acid sequence. The fragmentation of the peptide under collision-free vacuum conditions is modeled using molecular dynamics simulations (MD). The binding energy for the peptide bonds (C'-N bond) of Angiotensin II is estimated from ab initio calculations. The calculations are directed at predicting experimental measurements of the product ions from the photodissociation of the peptide. The product distributions simulated by the MD dissociation trajectories include predominantly y7/b1 and y2/b6 pair ions.     

Aryl-aryl coupling reaction using a novel and highly active palladium reagent prepared from Pd(OAc)2, 1,3-bis[diphenylphosphino]propane (DPPP), and Bu3P

A palladium-assisted coupling reaction of aryl triflate with arene was investigated, and a novel Pd reagent prepared from equimolar Pd(OAc)2, 1,3-Bis[diphenylphosphino]propane (DPPP), and Bu3P was developed. This method is useful for intramolecular biaryl coupling reactions, not only between aryl triflate and arene (triflate-amide), but also between aryl halide and arene (halo-amide).     

Effects of the acid chain length and copolymer crosslinking on the acylation of N-hydroxysuccinimide copolymers with carbobenzoxyoligo-ϵ-aminocaproic acids

N-Hydroxysuccinimide-type soluble copolymer with styrene and three similar divinylbenzene (3–4 mole-%) crosslinked copolymers with styrene, N-vinylpyrrolidone, and N,N-dimethylacrylamide were prepared from their precursor copolymers of N-acetoxymaleimide. Acylation of these N-hydroxyl polymers with carbobenzoxyoligo-?-aminocaproic acids was conducted in dimethylformamide at room temperature by using dicyclohexylcarbodiimide as condensing agent. The soluble styrene copolymer was acylated in good conversions (76–89%) in every case (n = 1–3), whereas the acylation of the crosslinked copolymers decreased slightly from n = 1 to n = 2, and dropped suddenly to only small conversions (4.7–7.4%) with n = 3, showing a marked inhibitory effect of crosslinking when the acids became longer. The effect of the microenvironment of the polymer did not appear significant. All the acyl polymers, including the precursor polymers, yielded the corresponding cyclohexylamides when treated with cyclohexylamine.     

Synthetic studies of vitamin D analogues. IX. Synthesis and differentiation-inducing activity of 1 alpha,25-dihydroxy-23-oxa-, thia-, and azavitamin D3.

Three vitamin D3 analogues, 1 alpha,25-dihydroxy-23-oxavitamin D3 (3), 1 alpha,25-dihydroxy-23-thiavitamin D3 (4) and 1 alpha,25-dihydroxy-23-azavitamin D3 (5) were synthesized. In the differentiation-inducing activity of human myeloid leukemia cells into macrophages in vitro, the 23-aza analogue (5) showed the least activity, while no remarkable differences were observed between the 23-oxa analogue (3) and the 23-thia analogue (4), which were less active than 1 alpha,25-dihydroxyvitamin D3 (1).     

Incorporating tritiated water into a 14C-sampling system for quantitative estimation of 14C activity in airborne effluent

The effects of incorporating tritiated water into a ¹⁴C-sampling system in sample preparation and ¹⁴C activity measurement by liquid scintillation counting were investigated. Experiments derived the limit of water content in the prepared sample, and also demonstrated that ¹⁴C activity can be determined without any interference from ³H contamination for a clear-sample solution. The results enabled us to estimate the permissible relative humidity of air required for accomplishing sample preparation and ¹⁴C activity measurement. These showed that for sampling of air with less than the permissible relative humidity, total ¹⁴C activity in airborne effluent can be evaluated accurately without dehumidification of air.The authors would like to thank T. Kozawa, K. Isaka and Y. Adachi of Inspection Development Company Ltd., Y. Hiyama of Zuihou Sangyou Company Ltd., and T. Mizutani, H. Watanabe, M. Takeishi and K. Shinohara of Japan Nuclear Cycle Development Institute for their valuable assistance.     

Mössbauer study of new vanadate glass with large charge-discharge capacity

Charge-discharge capacity and cyclicity of lithium ion battery (LIB) was evaluated in which 15Li₂O·10Fe₂O₃·xSnO₂·5P₂O₅·(70–x)V₂O₅ glass (x?=?0 and 20 in mol%, abbreviated as xLFSPV) was used as a cathode. A local structure of xLFSPV glass before and after charging was investigated by ⁵⁷Fe- and ¹¹⁹Sn-Mössbauer spectroscopies. ⁵⁷Fe-Mössbauer spectrum of xLFSPV glass with ‘x’ of 20 was composed of a doublet with isomer shift (δ) of 0.35_±0.02 mm s^???1 and quadrupole splitting (Δ) of 0.88_±0.03 mm s^???1 due to distorted Fe^IIIO₄ tetrahedra. ¹¹⁹Sn-Mössbauer spectrum of this glass consisted of a doublet with δ of 0.08_±0.01 and Δ of 0.52_±0.01 mms^???1 due to distorted Sn^VIO₆ octahedra. After discharging the battery from 4.5 to 1.0 V, larger δ of 0.40_±0.03 mm s^???1 and Δ of 0.94_±0.04 mm s^???1 were obtained, indicating that both iconicity of Fe-O bonds and local distortion of Fe^IIIO₄ tetrahedra were increased. On the contrary, identical δ of 0.09_±0.01 mm s^???1 and Δ of 0.50_±0.01 mm s^???1 were observed in the ¹¹⁹Sn-Mössbauer spectrum of 20LFSPV glass after the discharge, indicating that chemical environment of Sn^IVO₆ octahedra was not affected after the discharge. Charge-discharge curve of LIB containing 20LFSPV glass as a cathode active material recorded under the current density of 8.3 mA g^???1 (0.011 mA cm^???2) between 1.0 and 4.5 V showed a large initial charge capacity of 431.1 mAh g^???1 and discharge capacity of 382.3 mAh g^???1, respectively. These results indicate that 20LFSPV glass could be a new cathode active material for LIB.